LD Systems DSP 44 K RACK
This ready-to-use 3 U amp rack comes with LD Systems' DSP 44K power amplifier pre-wired to a patchbay providing convenient front panel input and output access. The rugged case with front and rear lids is made of 7 mm plywood with black film face and high-quality hardware.
Delivering 4 x 1,200 watts into 4 and 2 ohms, the amp features 24-bit signal processing and includes a preset library making it the perfect engine to power passive LD Systems loudspeakers such as Stinger® series models.
Specifiche Tecniche: 4-Channel Dante™ DSP Power Amplifier and Patchbay in 19"Rack Case
- Pre-loaded 3 U 19” rack case with power amp and patchbay
- DSP 44K 4-channel Dante™ power amplifier with 24-bit DSP
- 4 x 1,200 watts @ 4 and 2 ohms, 2 x 2,400 watts bridged @ 4 ohms
- Integrated preset library for LD Systems loudspeakers
- Patchbay with 4 x speakON, 4 x XLR/f, 2 x XLR/m, 2 x RJ45 Neutrik connectors
- 7 mm plywood case construction with high-quality hardware and front and rear lids
Specifiche : LD Systems DSP 44 K RACK
Tipo di prodotto: | Finali di potenza |
Peso: | 17,9 kg |
LDDSP44K - DSP 44 K
Tipo di prodotto: | Finali di potenza |
Tipo: | 4 canali |
Potenza di uscita (1 kHz @ 2 Ohm): | 4 x 1200 W |
Potenza di uscita (1 kHz @ 4 Ohm): | 4 x 1200 W |
Potenza di uscita (1 kHz @ 8 Ohm): | 4 x 675 W |
Potenza di uscita (1 kHz @ 4 Ohm, modalità bridge): | 2 x 2400 W |
High Z 70 V rms / 100 V peak: | 4 x 1200 W |
High Z 100 V rms / 140 V peak: | 2 x 2400 W |
Tipo di collegamento: | Classe H |
Risposta in frequenza: | 10 - 22000 Hz |
Fattore di distorsione armonica (THD): | < 0,05 % @ 1 kHz |
Rapporto segnale/rumore: | 104 dB |
Protezioni: | Cortocircuito, Limitatore clip, Limitatore multibanda, Protezione da corrente continua, Protezione dal surriscaldamento, Sovratensione, Limitatore altoparlante RMS, Soft-Start |
Elementi di comando: | Interruttore di accensione/spegnimento, Pulsante di uscita / blocco, Tasti di accesso diretto, Interruttore a manopola |
Indicatori: | Schermo a cristalli liquidi |
Ingressi di linea: | 4 |
Connessioni di ingresso di linea: | Neutrik XLR |
Uscite di linea: | 4 |
Connessioni di uscita di linea: | Neutrik XLR |
Uscite altoparlante: | 4 |
Connessioni di uscita dell'altoparlante: | Speakon |
Raffreddamento: | 2 ventole a controllo termico |
Temperatura ambiente massima: | 0 - 40° °C |
Alimentazione: | 220 V - 240 V AC, 50/60 Hz, Alimentatore switching |
Umidità relativa: | < 80% (senza condensa) |
Consumo di corrente (a pieno carico): | 1900 W |
Larghezza: | 482 mm |
Altezza: | 89 mm |
Profondità: | 320 mm |
Peso: | 1,808 kg |
Caratteristiche: | 19” / 2 U, Controllato con DSP, Correzione attiva del fattore di potenza, Interfaccia Dante, Software di monitoraggio del computer, Ethernet, LD Systems loudspeaker preset library, Porta frontale USB |
LDDSP44KPB - DSP 44 K PB
Tipo di prodotto: | Accessori per finali di potenza |
Modello: | 19” / 1 U |
Lunghezza: | 483 mm |
Altezza: | 44,5 mm |
Profondità: | 110 mm |
Materiale: | acciaio |
Spessore materiale: | 1,5 mm |
Superficie: | Rivestimento a polvere nero |
Peso: | 1,5 kg |
Produttore | LD Systems |
---|---|
BarCode | 4049521278570 |
Modello | 4-Channel Dante™ DSP Power Amplifier and Patchbay in 19"Rack Case |
Disponibilità | Non Disponibile |
Condizione | Nuovo |
Recensione su: LD Systems DSP 44 K RACK - 4-Channel Dante™ DSP Power Amplifier and Patchbay in 19"Rack Case
Scrivi la tua recensione
Solo gli utenti registrati possono scrivere recensioni. Effettua il log in oppure registrati