Interfaccia Audio per Protocollo Dante Focusrite A16R
Focusrite RedNet A16R si presenta in un robusto chassis completamente in metallo da 1U ed offre 16 canali connessi alla rete Dante a 24 bit, conversione AD/DA fino a 192kHz oltre ad audio analogico Line Level In e Out di elevata qualità con ridondanza completa di rete e alimentazione. Frequenza di campionamento e livelli operativi sono selezionabili da remoto. L'unità offre una gamma dinamica di 119 dB A-weighted, A-D e D-A, con una risposta in frequenza di 20Hz-20kHz ± 0,5dB. Scopri tutta la linea di prodotti professionali di Focusrite!
Caratteristiche Focusrite RedNet A16R
LINE INPUTS
- 0 DBFS Reference Levels +18 or 24dBu (switchable)
- Frequency Response 20Hz – 20kHz ± 0.1dB
- THD N <-100dB (0.001) unweighted, 20Hz – 20kHz; -1dBFS input
- EIN -96dBu A-Weighted (typical)
- Signal-To-Noise Ratio 120dB A-Weighted (typical)
- Converter Dynamic Range 120dB A-Weighted (typical), 10Hz – 20kHz
LINE OUTPUTS
- 0 DBFS Reference Levels Outputs 18 or 24dBu (switchable)
- Frequency Response Outputs 20Hz – 20kHz ± 0.1dB
- THD N Outputs <-100dB (0.001) unweighted, 20Hz – 20kHz; 23dBu input
- Noise In Presence Of Signal -94dBu A-Weighted (typical)
- Dynamic Range 118 dB A-Weighted (typical)
- Converter Dynamic Range Output 120dB A-Weighted (typical), 10Hz – 20kHz
CROSSTALK
- Input To Output Or Input <-100dB unweighted, 20Hz – 20kHz; 23dBu input
- Output To Input Or Output <-100dB unweighted, 20Hz – 20kHz; -1dBFS input
DIGITAL INPUT SAMPLE RATE CONVERTERS
- Sample Rate Range 32kHz to 216kHz
- Gain Error -0.3dB
- Dynamic Range Inputs >138dB
- THD N Inputs <-130dB (0.00003)
- Latency 11 to 45 samples (network and sample rate dependent)
DIGITAL PERFORMANCE
- Supported Sample Rates 44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHz (-4 / -0.1 / 0.1 / 4.167) at 24 bit
- Clock Sources Internal or from Dante Network Master
- External Word Clock Range
- Nominal sample rate ±7.5
REAR PANEL CONNECTIVITY
- Line Inputs 2 x DB-25 connectors
- Line Outputs 2 x DB-25 connectors
- Channel Count 2 x 2 AES/EBU channels
- Input (Optional DARS) 1 x Female XLR (Switchable with analogue input channels 15 and 16 at quad rates)
- Output 1 x Male XLR (Duplicate of analogue output channels 15 and 16 at quad rates)
- Word Clock Input 1 x BNC 75O port (switchable termination)
- Word Clock Output 1 x BNC 75O port
- PSU 2 x IEC Inputs with retaining clips.
- Network 2 x etherCON NE8FBH, also compatible with standard RJ45 connectors
FRONT PANEL INDICATORS
- Primary PSU (A) Green LED. Illuminates when an AC input is applied and all DC outputs are present
- Secondary PSU (B) Green LED. Illuminates when an AC input is applied and all DC outputs are present
- Primary Network Green LED. Indicates that a network connection is present on primary port when in redundant mode
- Secondary Network Green LED. Indicates that a network connection is present on secondary port when in redundant mode
- Network Locked Green LED. When unit is network slave, shows valid network lock
- Sample Rate Orange LED for each: 44.1 kHz, 48 kHz, x2, x4
- Pull Up/Down Orange LED. Indicates that the unit is set to operate on a Dante pull up/down domain
- AES/EBU Signal Indicators 2 I/O signal indicator LEDs
- Clock Source Orange LED for each
NETWORK MODES
- Redundant
- Allows unit to connect to two independent networks
- Switched
- Connects both ports to integrated network switch allowing daisy-chaining
Produttore | Focusrite |
---|---|
BarCode | 0815301013136 |
Modello | FOCUSRITE - A16R |
Disponibilità | Non Disponibile |
Condizione | Nuovo |
Recensione su: Focusrite A16R - Interfaccia Audio per Protocollo Dante
Scrivi la tua recensione
Solo gli utenti registrati possono scrivere recensioni. Effettua il log in oppure registrati